Mobile Home Metal Roof Over Kits | Benefits

Mobile home metal roofover is a great roofing solution to make your existing rooftop durable and efficient. This complete kit works to enhance the aesthetics of your mobile home and boost longevity. Installing a metal roof-over kit is also relatively easy and cost-effective. With the correct professionals and materials, you can make your existing rooftop elegant and robust. In this guide, we dig through Mobile home metal roof-over kits. Here, we discuss the advantages of the project, the installation guide, and the total cost of the roof system. So, keep reading this guide and get the best roofing solution for your mobile home.

Benefits of Metal Roof Over Kits for Mobile Homes

Metal roofs offer a diverse range of benefits over a traditional rooftop. Especially when you live in a mobile home, keeping the structure protected becomes necessary. In this case, a mobile home metal roof is a more complete solution than others. So below are the advantages you can expect after installing the roof-over kits.

Lightweight

You may be thinking about additional roof panels over a traditional ceiling. But don’t worry; despite their strength, metal roofs are also lightweight and versatile. It means the panels put minimal stress over the roof and stand alone strongly without damaging the home structure.

Longevity and Durability

Undoubtedly, metal roof panels have better strength than other ceiling materials. These panels are mostly made from durable components like steel and aluminum. It means your roof is less likely to get corrosion compared with traditional roof panels. Besides, the roof system is also potent to withstand heavy snow, rain, and high winds. With proper maintenance, you can keep them healthy for up to 50 years, and you don’t even need frequent reaping for them.

Energy Efficiency

Metal roofs are also known for their energy-efficient properties. The report shows that these roofing systems reduce cooling costs by up to 25% compared with traditional asphalt shingle roofs. It’s because metal panels effectively reflect solar radiant heat, reducing the need for excessive air cooling on summer days. All those properties give you a comfortable living inside and deduct your energy bill at the end of the month.

Fireproof

This roofing system is also resistant to fire. Unlike flammable materials like wood and asphalt shingles, metal roofs don’t spread sparkles during fire. It is beneficial for homes located near highly wildfire areas. During a fire, metal roofs prevent burning debris from coming through internal structures. In the end, the roof system prevents extensive damage to your mobile home.

Low Maintenance

Unlike wood and asphalt shingles, metal roofs take minimal maintenance and repair. With proper care, this roof system can last longer than traditional panels. DIY workers love to install these roof materials due to quick repair and cleaning. These metal panels save you time and effort during placements.

Better Insulations

Many metal roof panels come with pre-installed insulation. During winter, this protection adds a further layer to boost thermal comfort and reduce energy bills. Overall, metal panels give a complete roof system for your mobile home.

What Does Mobile Home Metal Roof Over Kits Include?

Metal roof-over kits are a complete package for your mobile home roof system. This kit includes various materials like panels, trim, flashing, fasteners, and other items. The package facilitates a new metal roof over an existing ceiling, offering various additional benefits for your home. So below are the components this kit typically includes,

Metal Panels

The basic component of the package is metal panels featuring an additional layer over a roof. These panels come in various shapes, sizes, and colors, so you can choose according to your home aesthetics. There are also different types of metal panels available. Corrugated panels ensure better strength and durability; on the other hand, standing seam panels feature a sleek, modern outlook.

Trim and Flashing

Trim and flashing are two crucial elements for a metal roof system. These components prevent water leakage and maintain the structural strength of the roof. You can find these elements as water-seal joints near the roof and edges or corners. Drip edge flashing is a common type of joint that directs water away from the roof edges. It means water doesn’t leak and damage the inside structure.

Fasteners

Metal roof-over kits carry special types of fasteners and hardware protecting the new metal panels on your existing roof. These components are designed to withstand harsh weather and keep panels firmly in place. Neoprene washer screws are a popular type of fastener used to tight-seal panels and prevent leakage issues.

Underlayment or Insulation

Few kits come with additional Insulation and Underlayment elements. These components are used to add a further layer of protection over your mobile home roof. It reduces heat transfer and prevents condensation, improving overall energy performance.

What is the Installation Process of Metal Roof Over Kits?

The installation process of metal roof-over kits is simple when workers have special care and attention. So below are the steps to adjust these panels over your existing roof system.

Roof Preparation

This is the first step before placing metal panels over a mobile home roof. It is essential to clean the surface and remove any loose shingles, nails, dirt, or leaves. Besides, inspect for any possible damaged or deteriorated areas. If there is any quick repair or replacement of the spots before installation.

Permits and Building Codes

Before placing metal panels over an existing roof, it is crucial to understand building codes and require permits. That’s how you can prevent any penalty charges and complications from the local authorities. Building and permits mainly indicate the specific materials, roof pitch, and installation methods. You can contact the local building department and understand the requirements for installing a metal roof over a Mobile home.

Professional Assistance or DIY?

Many owners are willing to install metal panels by themselves. It may save them the additional cost of roof installation. However, a professional worker carries the necessary equipment and takes responsibility for the project. They follow the correct steps to prevent any possible leaks or errors during the installation. With the right professional assistance, you can save lots of time and effort for such roofing projects.

Maintenance and Care

It is essential to take proper care and maintenance to boost the lifespan of your metal roof. So, inspect the roof system in a timely manner and fix any possible damages, loose fasteners, or leakage issues. Regularly clean the roof surface and gutters to prevent water or debris build up over the ceiling. You can use low-pressure power washers to remove sticky clogs on your metal roof.

How Much Does a Mobile Home Metal Roof Over Kits Cost?

Several factors depend on the total cost of a metal roof over a mobile home. Mainly, there are things like kit sizes, materials, brands, and DIY installations that vary. Still, DIY mobile home roof-over kits range between $800 and $2,900. If you purchase a non-insulated metal roof for a single-wide home, it may cost $1,000 and $2,000. On the other hand, a double-wide home may cost between $1,800 and $3,000. Anyway, a metal roof is one of the best options for mobile homes, as it offers better durability and energy performance. You can plan the overall cost according to your budget, type of material, service cost, and others.

FAQs

Below are the most asked questions related to the topic. Drop down to get your quick answers.

Is a Metal Roof Too Heavy for a Mobile Home?

Metal roofs are much lighter than traditional shingles. It means the panels won’t stress the roof and damage the internal structure of the home.

Is Metal Roof Over Noisy While It Raining?

It depends; if the metal roof is uninsulated, it becomes noisy during heavy rain. Still, if the workers follow the correct sheathing and add some insulating elements underneath, the noise may not be heavily disturbed.

Is the Metal Roof-over Kits Customizable?

Yes, metal roof-over kits are customizable. Many brands offer selectable metal roof kits where you can choose panel size, shape, colors, fasteners, trim types, etc.

How Do Metal Roof Over Kits Perform During Bad Weather?

Metal roofs offer better wind resistance facilities. It means these roofing systems extend from eave to ridge and firmly interlock with panels. This construction minimizes the gaps, which lets winds lift the panels.

Can I Install a Metal Roof Kit Over the Existing Roof?

Yes, you can install a metal roof over the existing roof. Metal panels are lightweight and easily placed on existing roofs without much stressing the internal structure.

Conclusion

That is the guide about Mobile home metal roof-over kits. We hope you get a clear answer related to the topic. Undoubtedly, metal roofing offers complete protection for your mobile home’s top. These panels are lightweight, durable, and wind and fire-resistant. By installing the roofing, you can enjoy a peaceful living inside of your home. Lastly, the panels are easy to maintain and won’t be quickly damaged in harsh weather.